With the efforts of medical staff, the epidemic situation in our country has been effectively controlled, and our people's awareness of self-protection has deepened. We all know that we need to wear disposable masks when going to some public places to prevent the epidemic from recurring. Moreover, the international epidemic situation It's not very good, so we should wear disposable masks for epidemic protection.
1. Place the non-woven fabric and melt-blown fabric on the production line and press them together by machine.
2. There are three inclined planes on the machine, and the pressed large non-woven fabrics are gathered along these three inclined planes to form a "folded structure". Again, the face of the mask is compacted by the machine flattening link.
3. Cut the pressed cloth into small pieces and lock the edges.
4. During this process, a metal wire (i.e. the nose clip) will be matched and transported at the same time to be pulled into the edge. When worn, the mask is secured to the bridge of the nose by kneading the wire to maintain a good seal.
5. The narrow side of the non-woven piece with metal wire is equipped with ear rope, which is flattened together with the crimp to fix the ear rope. Complete the full mask.
6. Staff will randomly inspect some masks, and put qualified products into qualified areas for disinfection and sterilization.
7. Send qualified disposable masks to the disinfection room in batches for disinfection and sterilization. Since non-woven fabrics are not resistant to high temperatures, ethylene oxide gas is usually used for sterilization. This allows for the packaging and sale of qualified single-use masks.
